The user of the power press must be clear about the processing capacity of the power press used. Overload has a negative impact on the power press, molds and workpieces. Avoiding overload is the most basic condition for using the power press. The editor said that everyone can judge whether it is overloaded by the following phenomenon.
1. Overload of the motor power will cause: the current of the motor increases and the motor overheats; during a single stroke, the deceleration of each operation is very large; during continuous stroke, as the number of actions increases, the speed gradually decreases until it slips Block stopped.
2. If the working load curve exceeds the allowable load curve, it will appear: the crank is twisted and deformed; the gear is damaged; the connecting key is damaged; the clutch slips and overheats.
3. The nominal pressure is overloaded, and the power press will appear: the operation sound is abnormally high, the vibration is large; the crank is bent and deformed; the connecting rod is damaged; the body is cracked; if there is an overload protection device, the protection device will act.
