How To Ease The Amplitude Of The Power Press

Apr 01, 2020

Leave a message

Power presses are used in many fields by virtue of their own advantages and performance, and are loved and recognized by users. However, no matter how good the equipment is, after using it for a while, various problems will occur, such as Recently, many users have reported that the amplitude of the device during use is not only affecting the normal use effect, but also causing damage to the device if it is serious. How can we reduce the amplitude of the device when using it? Let's look together.

1. Vibration source control, attenuation during transmission to prevent vibration objects.

2. Horizontal adjustment of the power press (the nut rotates counterclockwise, and you need to know how to raise the press when it is installed in the equipment).

3. Insert the required angle iron into the foot hole, insert the screw into the hole, and then clamp the foot with the nut. Sampling procedure for anchor bolts.

4. Insert the nut and press it with the power press. After fixing, check whether the anchor bolt is fixed. Tighten the screws to a fixed height.


Send Inquiry
Send Inquiry