1. Pay attention to safety during maintenance
Ensure that the locking / opening process is properly performed to ensure the safety of maintenance personnel, and ensure that the sleeve is placed at the bottom of the stroke before the brake maintenance work. If this is done, there is no need to lock the sleeve.
2. Let the power press operator join the maintenance process
Involve the press operator in the process of maintaining the press to enable them to remind the maintenance or management personnel at any time when problems occur. They operate the press every day, making it easier to hear or see signs of problems. Just like driving the same car every day, you can notice the abnormal sound at the first time, which is the same for the operator.
3. Workshop environment control
A clean press enables operators or maintenance personnel to quickly discover when a problem occurs. For example, oil leakage, air leakage, breakage, etc. If the press is clean, it is easy to find out its location.
4. Leave electrical work to relevant professionals
Only qualified electrical technicians can maintain the electrical circuit of the press, but you can still check whether the light bulb on the control panel of the press is normal. Each shift must ensure that the light bulb is working and correctly display the Kinds of operating conditions.
