Adjustment Of Power Press

Apr 06, 2020

Leave a message

We all know that power presses are used in many different fields due to their unique characteristics. The equipment is a type of forging equipment, so the forging parts are very important in daily use. Therefore, in order to ensure that the equipment can be used normally and in To achieve the ideal operating state during use, we need to check and adjust it before use. Which aspects need to be adjusted?

1. Carry out a reliability test on the safety valve of the power press, adjust the safety valve to the working pressure, and conduct five consecutive tests.

2. Before use, the whole machine must be tested for pressure. The pressure used in the test is 1.25 times the working pressure. Check that the piston extends to a strong working stroke. The pressure is stabilized for about 15 minutes, and the pressure gauge reading drops The value shall not exceed 4% of the test pressure.

3. After the pressure of all the power presses is removed, the pointer of the pressure gauge returns to the "0" position, the parts should not be damaged, the rod must not be significantly deformed, the moving parts should not be stuck, and the oil circuit should be free of leakage .


Send Inquiry
Send Inquiry